Custom Side Panels - Kitchen Aid Stainless Serie Guia De Instalacion

Backer Panels
NOTES:
Dashed lines represent placement of backer panels on overlay
■
panels.
Illustration shows backer panels placed on decorative
■
overlays.
6 ⁄ "
3
16
(15.7 cm)
Top Offset
1 ⁄ " (4.13 cm)
5
8
70 ⁄ "
1
2
(179.1 cm)
A
Model D
36 14¹/ "
4
(36.20 cm)
42 16³/ "
4
(42.55 cm)
48 19¹/ "
4
(48.90 cm)
C
Side Offset
1/2" (1.27 cm)
Bottom Offset
1/2" (1.27 cm)
Handle
Side Offset
1/4"
(6.4 cm)
70 ⁄ "
1
2
(179.1 cm)
B
Bottom Offset
1/8" (3.2 mm)
E F
19¹/ " 33³/ "
4 4
(48.90 cm) (85.73 cm)
22³/ " 39³/ "
4 4
(57.79 cm) (100.97 cm)
26¹/ " 45³/ "
4 4
(66.68 cm) (116.21 cm)
Overlay Series Door Handle Kits
The following handle style is available. Contact your KitchenAid
dealer or KitchenAid Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Knurl grip handle with chrome endcaps - W10782873

Custom Side Panels

Custom side panels may be needed when not enough space is
available to have cabinets on both sides of the refrigerator or when
the refrigerator is placed at the end of a cabinet run. You may
choose an Inset, Flush, or Recessed Inset panel installation.
Refrigerator and Side Trim Dimensions
The width and height of a side panel are determined by the type of
installation you are planning.
NOTES:
The dimensions shown are actual product dimensions and
■
may not reflect the needed panel installation dimensions.
The side panel should be a minimum of 1/2" (1.27 cm)
■
thick to avoid warping.
If the opening depth is 25" (63.5 cm) or more, you may
■
want to install a support board on rear wall.
Side Trim
23 19 ⁄ "
32
(59.9 cm)
23 17 ⁄ "
32
(59.8 cm)
23 ⁄ "
15
32
(59.6 cm)
11/16"
(18.0 mm)
1/2"
(12.2 mm)
23 19 ⁄ "
32
(59.9 cm)
23 17 ⁄ "
32
(59.8 cm)
23 15 ⁄ " 9/16"
32
(59.6 cm) (13.9 mm)
5/8"
(15.7 cm)
13