Indicator Description - Samsung BabyView Manual Del Usario

Pairing Camera and Monitor
The units already come paired for your convenience.
If you have additional camera, pair your camera as follow:
1. The pair button is used to pair additional cameras. You can assign numbers to the
cameras.
2. To pair additional cameras: Quickly press the button. Do not hold down on the
button.
Up to 4 Cameras may be paired.
Power on wireless monitor and wireless camera.
1.
Touch the live view screen on the monitor to make the settings icon appear.
2.
Press the [ ] button on the monitor.
3.
Select [ ] icon.
4.
Select camera number.
5.
The monitor will search for the camera when set to pairing mode.
A countdown clock will appear at the middle of the screen and will start counting
from 30 to 0.
Press the [PAIR] button found on the bottom of the camera.
6.
If the monitor successfully pairs with the camera within the 30 seconds, the
7.
monitor will automatically switch to the camera's current view.
Pairing BabyView Watch to your system
Make sure the monitor is turned on.
1.
Touch the monitor screen, and the setting icon will appear.
2.
Press the [ ] button on the monitor to show the "Menu" interface.
3.
Select the [ ] icon on the Bluetooth watch. It should show the[
4.
icon.
The monitor will search for the Bluetooth watch. When the monitor and Bluetooth
5.
watch have paired successfully, the monitor will show that it has been paired, and
an" [ ] " icon will show up on the Bluetooth watch.
10 · Getting Started
SEW-3055W-170117.indd 10

Indicator Description

PAIR
a b c
No. Icon
a
b
]
c
d
d efghij l
Name Description
Shows the strength of the signal being received
from the camera.
Signal
Indicator
If an 'x' shows up on the signal bar, then the
system is "out of range".
Digital Clock Displays the time that is set on the monitor.
Camera Indicates which camera is being displayed on the
Number current screen.
Sound level Indicates the sound level of the Active Camera.
k
m
n
2017/1/17 14:40:18