Hoover DXW4 H7A1TCEX-S Manual De Instrucciones página 14

ONE FI EXTRA
This appliance is equipped with ONE Fi
EXTRA technology that allows you to control
it remotely via App, thanks to Wi-Fi function.
MACHINE ENROLLMENT (ON APP)
●Download the Hoover Wizard App on your
device.
The Hoover Wizard App is available for
devices running both Android and
both for tablets and for smartphones.
Get all the details of the ONE Fi EXTRA
functions by browsing the App in DEMO
mode.
● Open the App, create the user profile and
enroll the appliance following the instructions
on the device display or the "Quick Guide"
attached on the machine.
Using an Android smartphone equipped
with NFC technology (Near Field
Communication), the enrollment
process is simplified (Easy Enrollment);
in this case, follow the instructions on
the phone display, PLACE AND KEEP IT
NEAR the ONE Fi EXTRA logo on the
machine dashboard, when requested to
do so by the App.
NOTES:
Place your smartphone so that the NFC
antenna on its back matches the
position of the ONE Fi EXTRA logo on
the appliance (as illustred below).
If you do not know the position of
your NFC antenna, slightly move the
smartphone in a circular motion
over the ONE Fi EXTRA logo until the
App confirms the connection. In
order for the data transfer to be
successful, it is essential TO KEEP
T H E S M A R T P H O N E O N T H E
DASHBOARD DURING THESE THE
F E W S E C O N D S
PROCEDURE; a message on the
iOS,
device will inform about the correct
outcome of the operation and advise
you when it is possible to move the
smartphone away.
Thick cases or metallic stickers on
your smartphone could affect or
prevent the transmission of data
between machine and telephone. If
necessary, remove them.
T h e r e p l a c e m e n t o f s o m e
components of the smartphone (e.g.
back cover, battery, etc...) with non-
original ones, could result in the NFC
antenna removal.
ENABLE REMOTE CONTROL (VIA
APP) After the machine enrollment,
every time you want to manage it
remotely through the App, firstly you
have to load the laundry, the detergent,
close the door and select the ONE FI
EXTRA position on the machine. From
that moment on you can manage it
through the App commands.
NOTE : In case of door opening with remote
controll on, to restore the connection with the
App, close the porthole and press start. The
cycle will resume from where it stopped.
WIRELESS PARAMETERS
Parameter
Wireless Standard
Frequency range
Max Trasmit Power
Minimum
Receiving
Sensitivity
14
O F T H E
Specifications
802.11 b/g/n
2,412 GHz. - 2,484 GHz
802.11b (11Mbps) +18,5 ± 2 dBm
802.11 g (54Mbps)
+16 ± 2 dBm
802.11 n (HT20, MCS7)
+14 ± 2 dBm
802.11b (11Mbps)
-93 dBm
802.11 g (54Mbps)
-85 dBm
802.11 n (HT20, MCS7)
-82 dBm