Product Setup - D-Link DWR-978 Guia De Instalacion

PRODUCT SETUP

Ensure that your DWR-978 5G AC2600 Wi-Fi Router is powered off before performing the steps
below.
Router
SIM
card
Modem
Router
Modem
Router
PC
Modem
Router
PC
DWR-978
Step 1:
If you are connecting to a LTE connection, insert a standard
USIM card into the SIM card slot.
Note: Do not attempt to insert a Nano SIM or Micro SIM into the SIM
card slot.
Step 2:
If you are connecting this router to a modem, insert one end of
an Ethernet cable into the Gigabit WAN/LAN port on the back of the
router and the other end into your wired Internet connection device.
Note: When connected to a modem, by default, the LTE connection
will be used as the main WAN connection. The router will
automatically use the wired connection if the LTE connection is not
available.
Step 3:
Insert the supplied Ethernet cable into a LAN port on the back panel
of the DWR-978, and an available Ethernet port on the computer
you will use to configure the unit.
Step 4:
Connect the power adapter to the power input on the back panel of
your DWR-978 5G AC2600 Wi-Fi Router. Plug the other end of the
power adapter into a wall outlet or power strip and press the power
button down.
The POWER LED on the router will light up to indicate that power is
being supplied to the router.
Step 5:
To configure the DWR-978 5G AC2600 Wi-Fi Router:
Open a web browser window and enter 192.168.0.1 into the address
bar.
Leave the password area blank and click Login to set your device
password.
3