ENGLISH
To put it on, we recommend the following process:
1) Place the heating pad with its cover on a flat surface, stretch out
2) Stick the upper straps to the Velcro at the shoulder area, forming
3) Put the heating pad on the back as if it were a vest (see figure 3).
4) Adjust the two upper straps, so that they cover the shoulders.
5) Fit the belt clasp formed by the two lower straps and adjust it to
To better appreciate the heat, we recommend that you adjust the pad
to the body using the three fastening elements and cover it with a
piece of clothing. (See Fig.1 to Fig.4)
BUCKLE
BUCKLE
22
Manual Ergonomicas.indb 22
the upper straps and open the waist belt so that the two Velcro
straps at the shoulder area are facing downwards and the belt-
straps upwards (see figure 1).
two wide circles (see figure 2).
the waist (see figure 4).
FIGURE 1
FIGURE 3
CLASP
BUCKLE
CLASP
FIGURE 2
CLASP
FIGURE 4
15/03/10 16:50