EAS ELECTRIC EMH363CGB Manual De Instrucciones página 44

cleaning and maintenance
■ Remove the burner lids and Flame Spreaders by pulling them upwards and away
from the top plate.
■ Soak them in hot water and
■ After cleaning and washing them, wipe and dry them carefully. Make sure that the
flame holes are clean and completely dry.
■ Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
■ Gently wipe the gnition device and flame supervision device with a well wrung-out
cloth and wipe dry with a clean cloth.
■ Before placing the burners back on the top plate, make sure that the injector is not
blocked.
their respective recesses.
a little
detergent or
i
2
1
3
4
5
6
7
4
1 2 3
washing up liquid
2
3
4
7
6
5
5
4
EN-17
.
into
V.3