Scheduling Options - Mitsubishi Electric RedLINK MHK2 Manual De Operación

Scheduling Options

This controller may be configured to be programmable or non programmable for Residential and
Commercial modes. Both options are explained below.
Controller schedule is an optional menu item. It will only show up in the controller menu if enabled by
your heating or cooling professional.
Residential Program Default Settings
Each day can be programmed for different heating and cooling settings in 4 unique periods (Wake,
Leave, Return, Sleep) in the controller MENU/SCHEDULE. Make sure that controller schedule is
enabled by your heating or cooling professional in the controller Installer Setup menu.
See table below for the default schedule with adjustable settings:
Controller schedule is turned ON
Period Start Time
Wake
6:00 a.m.
Leave
8:00 a.m.
Return
6:00 p.m.
Sleep
10:00 p.m.
Following Schedule
Sched.
Back On/Off
Vane Vane
• Wake, Leave, Return, Sleep periods appear on the controller home screen.
• Temperature settings for all four periods, different per days or group of days, are adjustable in
controller MENU/SCHEDULE.
Schedule Period
An active period is shown underlined on the controller home
screen. Periods shown vary on whether the local controller
schedule is enabled and turned On.
1 Controller schedule is turned OFF: Schedule periods
are not displayed.
2 Controller schedule is turned ON: Wake, Leave, Return,
Sleep periods are displayed.
33-00447EFS_B.indd 10
Heat (Mon-Fri)
69 °
61 °
69 °
61 °
Heat AM
Mode Fan
Auto
Auto
Wake Leave Return Sleep
Mode Mode Menu Menu Fan Fan
Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)
79 ° 69 °
86 ° 61 °
79 ° 69 °
83 ° 61 °
Sched.
On/Off
Heat
Leave Return
Vane
Heat
Return
Leave
Vane
10
79 °
86 °
79 °
83 °
Auto Heat Auto
Leave Return
Vane
Heat Auto
Auto
Leave Return
Vane
10/17/2019 3:22:54 PM