Wi-Fi Connection Status; Redlink Wireless Receiver Led Status - Mitsubishi Electric RedLINK MHK2 Manual De Operación

Wi-Fi Connection Status

For the Wi-Fi icon in the top-right corner of the
screen, there are three displayed settings:
No icon: The MIFH2 RedLINK Wireless
Receiver is not connected to the Mitsubishi
Electric Wireless Interface 2.
Disconnected icon: The MIFH2 RedLINK
Wireless Receiver is connected and commu-
nicating with the Mitsubishi Electric Wireless
Interface 2, but the Wireless Interface is not
connected to a Wi-Fi network.
Connected icon: The MIFH2 RedLINK
Wireless Receiver is connected and commu-
nicating with the Mitsubishi Electric Wireless
Interface 2, and the Wireless Interface is con-
nected to a Wi-Fi network.
Note: The MHK2 supports the Mitsubishi
Electric Wireless Interface 2 or later, which
allows the system to be connected to kumo
cloud .
®

RedLINK Wireless Receiver LED Status

Connect LED:
• Flashing Green: In RedLINK Wireless setup mode.
• Fast Flashing Green: In the process of pairing.
• Solid Green: At least one RedLINK™ device is enrolled onto the receiver.
• Amber: Please wait.
• Red: RedLINK™ device is not communicating.
• Off: No RedLINK™ devices are enrolled onto the receiver.
Notes:
• Flashing status light times out after 15 minutes of inactivity. Press CONNECT
again if necessary.
• When first powered on the status light will be off.
33-00447EFS_B.indd 16
Vane
Vane
Vane
16
Heat Auto
Leave Return
Heat Auto
Leave Return
Heat
Auto
Leave Return
10/17/2019 3:22:58 PM