Display On Other Peripheral; Important; Connecting The Monitor Of The Kit To A Tv; Connecting The Monitor Of The Kit To A Pc - Extel WESV 82500 Instrucciones De Uso E Instalación

DISPLAY ON OTHER PERIPHERAL (TV OR PC)
7

IMPORTANT :

a. Connecting the monitor of the kit to a TV
In case of a bad image, check that the format of the video signal selected is compatible with
your additional screen (Chap. 6 paragraph g "Setting the A/V output").
1. Switch the monitors off.
2. Connect the two monitors with the RCA/Jack cord supplied
3. Connect the mini jack cable at the back of the monitor to the AV output and the RCA
yellow jack (video) and white (audio) terminal ends. (See image below)
4. Switch the monitors on.
5. When connecting the mini jack at the back of the monitor, the video switches off to appear
on the additional monitor (example TV)
b. Connecting the monitor of the kit to a PC
2
CAUTION
14GB
When connecting to the peripheral, the image of the monitor is cut.
You must have installed on your PC the software supplied in
order to connect the monitor.
CFI EXTEL WESV 82500 - 06/2009 - V1
Audio
Video
Do not use the
USB cable for
this type of
connection.
Do not use the
RCA cable for
this type of
connection.