Function And Use Of The Kit; Commissioning; Connecting The Cameras; Associate The Camera To The Monitor - Extel WESV 82500 Instrucciones De Uso E Instalación

11. Audio/Video output on Jack.
12. USB plug.
13. 5VDC power supply input.
14. Stand
15. 5 VDC Adaptor (angle plug)
16. Audio/Video cable
17. USB cord
18. Remote control unit
6

FUNCTION AND USE OF THE KIT

a. Commissioning
Press the key of the monitor or the key of the remote control unit (use these same
keys to switch the monitor off).
b. Connecting the cameras
1- Connect the cord of the 5VDC adaptor to the "Power supply" input of the camera.
2- Plug the adaptor into a mains socket.
c. Associate the camera to the monitor
For the first use, the camera included in the kit is already paired. If not or to add another
camera, proceed as follows:
Press the key of the monitor and go to the "PAIR CAM" menu of the monitor with the
key q.
Choose a free channel between 1, 2, 3 and 4 with the keys t and u .
Press the key to start saving.
You have 60 seconds to pair the camera.
Open the cover located at the back of the camera and then press the button "Pairing key"
with a sharp object (for example a paper clip).
Only one channel per camera can be activated on the monitor.
In the case of several cameras, you should choose 1 different channel for each camera.
CFI EXTEL WESV 82500 - 06/2009 - V1 9GB