Accessories - MANOSTAT E-SERIES 72-410-014 Manual De Operación

Description
TUBING LINKS (Sold in packages of 5 links)
Silicone tubing link — 1/16 in. ID
Silicone tubing link — 1/8 in. ID
Silicone tubing link — 3/16 in. ID
Silicone tubing link — 1/4 in. ID
Sinkers
PTFE sinkers keep tubing at the bottom of any container, eliminating the possibility of adhering to the reservoir wall.
Ideal for use with pumps and dispensers, these sinkers have hose barb ends for simple insertion into flexible tubing.
PTFE composition offers solvent resistance and can be autoclaved.
Sets of two (2): small (for use with 1/16 in. to 1/8 in. ID tubing)
and large (for use with 3/16 in. to 1/4 in. ID tubing)
Sinkers, set of 2 (one each size)
Sinkers 1/16 in. — 1/8 in. each
Sinkers 3/16 in. — 1/4 in. each
Shims
Shim for pump (required for 1/16 in. ID tubing links)*
*Flow shim installation: Remove paper covering to expose
adhesive before installing shim.
NOTE: Shim may also be used on 1/8 in. tubing link.

ACCESSORIES

8
Part Number
72-420-250
72-420-350
72-420-450
72-420-550
75-250-100
75-250-102
75-250-104
72-420-100