Twin-Star International 33WM0615 Manual De Instrucciones Adjunto página 4

4. Locate Hearth/Base (A) and set out fi nished
side up on the fl oor.
5. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
6. Attach the Completed assembly from step 3 to
the Hearth/Base (A). Make sure that dowels
are seated into the pre-drilled holes in the
Hearth/Base. Using Bolts (L) and Washers (M)
attach panels through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
7. Locate Left Side Panel (E), insert one Wood
Dowel (N) into each of the pre-drilled holes.
Attach the Side Panel to Hearth/Base (A) and
the completed front assembly. Then use Bolts
(L) and Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
8. Locate Right Side Panel (F), insert one Wood
Dowel (N) into each of the pre-drilled holes.
Attach the Side Panel to Hearth/Base (A) and
the completed front assembly. Then use Bolts
(L) and Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-3 E-3
L
M
N
N
Hearth/Base
M
L
F
M
Right
Side
Panel
N
N
N
A
L
Left
Side
Panel
E
N
V2.0 V1.0