Twin-Star International 33WM0615 Manual De Instrucciones Adjunto página 5

9. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 8. Then locate
Mantel/Top (G) and lay fi nished side up on
top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolts (L) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom,left
and right.
11. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUCTIONS
PRIOR TO INSTALLING ELECTRIC
INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE
INSERT IN YOUR FIREPLACE CLOSE
TO ITS FINAL POSITION.
12. Lift insert carefully into the back of the unit
and center in the insert opening. Do not drag
insert across Hearth/Base (A) as it may
scratch your unit.
13. Install the mounting brackets to hold insert
fl ush against the inside of the mantel front
panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
FINAL POSITION.
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 33WM0615
Made in China
Printed in China
© 2010, Twin-Star International, Inc.
E-4 E-4
G
N
N
M
L
Completed
Assembly
Completed Unit
Mantel/Top
N N
Install
Insert
From
Back
Electric
Fireplace Insert
N
V2.0 V1.0