Using The Control Knob; Pairing With A Bluetooth Device; Connecting Two Speakers - ION TOTAL PA PRIME Guia Del Usuario

Operation

Using the Control Knob

The Control Knob defaults to controlling the Main Volume for all channels. Press the Control
Knob to toggle through different functions: Mic Channel, Source, Echo effect level, and EQ.
•
Press the Control Knob to select the Mic channel 1 or 2. Rotate the Control Knob to raise or
lower the volume of the Mic input independently of the other channels.
•
Press the Control Knob again to select Source. Rotate the Control Knob to raise or lower the
volume of the Aux/BT/USB/Radio signal independently of the Mic channels.
•
Press the Control Knob again to control the Echo effect level for the Mic channel.
•
Press the Control Knob again to select Low EQ adjustment. Rotate the Control Knob to raise
or lower the low frequencies on all channels.
•
Press the Control Knob again to select High EQ adjustment. Rotate the Control Knob to
raise or lower the high frequencies on all channels.
•
Press the Control Knob again to return to Main Volume adjustment.
If there is no activity on the Control Knob for 5 seconds, the function will go back to Main
Volume.

Pairing with a Bluetooth Device

1. Power on the Total PA
automatically enter Bluetooth pairing mode indicated by the Bluetooth LED flashing blue.
2. Navigate to your device's Bluetooth setup screen, find Total PA Prime, and connect. Do
not connect to Total PA Prime_BLE; this is reserved exclusively for connecting to the ION
™
Sound XP app. When connected, the Bluetooth icon on the display will flash and you will
hear "Connected".
Note: If you experience trouble in connecting, select "Forget this Device" on your Bluetooth
device and try to connect again.
3. To disconnect, turn off Bluetooth from your device's Bluetooth settings.

Connecting Two Speakers

Linking Two Compatible Speakers (Stereo-Link 2.0
1. Power on both Total PA
are in Bluetooth pairing mode and not connected to a device.
2. Press and hold the Repeat/Link button on one speaker (the primary speaker which will
control both) to enter Stereo Link mode. Once a link has been established, the word LINK
will appear on both speaker displays.
3. Connect to the primary speaker via Bluetooth.
To disconnect, double press the Repeat/Link button.
Note: The speakers should be within 100' (33.3 m) of each other to properly link.
TM
Note: Total PA Prime is not compatible with previous ION PA models. To link to a previous
model, use an XLR cable (not included) and link from the newer PA to the previous one via the
XLR Out on Total PA
™
Prime by flipping the power switch on/off. Total PA
TM
Prime speakers by flipping their on/off switches. Make sure they
TM
Prime and the XLR Aux In on the previous model.
TM
)
™
Prime will
7