Viewing Your Product's Certifications - Zyxel NBG-334SH Manual Del Usuario

Set Up Your Computer's IP Address
This section shows you how to set your Windows NT/2000/XP computer to automatically
get an IP address. This ensures that your computer can communicate with your NBG-
334SH. Refer to your User's Guide for detailed IP address configuration for other Windows
and Macintosh computer operating systems.
1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings,
Control Panel.
2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and
Dial-up Connections.
3 Right-click Local Area Connection and then
click Properties.
4 Select Internet Protocol (TCP/IP) (under the
General tab in Win XP) and click Properties.
5 The Internet Protocol TCP/IP Properties
screen opens (the General tab in Windows
XP).
6 Select the Obtain an IP address
automatically and Obtain DNS server
address automatically options.
7 Click OK to close the Internet Protocol
(TCP/IP) Properties window.
8 Click Close (OK in Windows 2000/NT) to
close the Local Area Connection Properties
window.
9 Close the Network Connections screen.

Viewing Your Product's Certifications

1 Go to http://www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that
product's page.
3 Select the certification you wish to view from this page.
ENGLISH
17