Troubleshooting - Belkin ExpressCard FireWire 800 Manual Del Usuario

Troubleshooting

The ExpressCard and devices connected to the computer
do not work properly.
Please do the following:
1. Check that all the cables you are using are the correct types,
and that they are all securely connected.
2. Make sure all devices are powered on and connected to the
proper power supply and source.
3. Reconnect daisy-chained devices you may have disconnected
for installation. If reconnecting does not
clear up the problem, restart your computer.
4. Make sure you have properly installed the ExpressCard.
The computer did not detect the ExpressCard.
1. Make sure that the ExpressCard is correctly plugged into the
ExpressCard 34/54mm slot; if not, plug in it securely.
2. If the ExpressCard is plugged in correctly, see if its gold
connectors are clean; if not, clean the connector surface.
3. Follow the procedure on page 9 titled "Verifying Proper
Installation". If the ExpressCard designation "OHCI IEEE 1394b
Host Controller" does not appear in the Device Manager,
update your computer BIOS to the latest version (contact your
computer manufacturer for details). If after updating your BIOS
your computer still does not detect the ExpressCard, contact
your computer manufacturer for advanced support for BIOS.
10 10