Creating A Playback Loop - Insignia IS-PD040922 Guia Del Usuario

IS-PD040922.fm Page 14 Wednesday, January 4, 2006 6:26 PM
Selecting an audio language
If a DVD has more than one audio language option, you can change
the language. Some DVDs only let you change languages from the
DVD menu.
To select an audio language:
1 Insert a DVD into your personal DVD player and start playback.
2 Press the AUDIO button. The following information appears:
The display disappears automatically after three seconds if you do
not press the AUDIO button again.
3 Press the AUDIO button one or more times to select an audio
language.
Enlarging the screen image
To enlarge the screen image:
1 Insert a DVD into your personal DVD player and start playback.
2 Press the ZOOM button one or more times to select an image
size.
•
•
•
•

Creating a playback loop

To create a playback loop:
1 Insert a DVD into your personal DVD player and start playback.
2 Find the place on the DVD where you want to start the playback
loop, then press the A-B button.
3 Find the place on the DVD where you want to stop the playback
loop, then press the A-B button. Your personal DVD player plays
the loop you created repeatedly.
4 Press the A-B button again to stop playing the loop and return to
normal playback.
14
IS-PD040922 Personal 7" LCD Monitor and DVD Player
Press once to enlarge the image to twice its normal size.
Press twice to enlarge the image to three times its normal
size.
Press three times to enlarge the image to four times its
normal size.
Press four times to return to the normal image size.
www.insignia-products.com
Total languages
Current language