Parts:
Top/ Bottom
Cooking Plates
Ready Indicator Light
Power Indicator Light
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there may be
accessory parts contained within the packaging material.
WARNING: Do not place any part of the product in a dishwasher.
1. Make the batter/dough for your flatbread.
2. Plug the appliance into a standard 120-volt AC electrical outlet, and then turn the
Temperature Control Dial to your desired Heating level to Preheat.
3. Preheat the appliance with the Top Cooking plate in the up position so that the appliance is
open.
4. The Power Indicator will light up to indicate it is in use. Once the light turns off and the
Green Ready light turns on (usually about 6-8 minutes the appliance is ready for use.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
Using Your Tortilla/Flatbread:
WARNING: Handle and Parts may become hot during Preheat/Cooking process, please use
an oven-mitt for protection.
1. You can lightly coat your Tortilla/Flatbread maker with some vegetable oil using a pastry
brush.
2. Form your Tortilla/ Flatbread dough into 2 inch balls. Pat them using your fingers to lightly
flatten the dough ball into a patty. Place the dough patty on the Bottom Cooking plate
slightly rear of the center.
Temperature
Control Dial
4
Pressing
Handle