Using The Remote Control - peerless-AV XTREME SPK-080 Guia Del Usuario

Using The Remote Control

1. Turn on the TV.
2. Turn on the soundbar by aiming the included remote
at the front of the soundbar and pressing the ON
button. Your soundbar will begin to play the audio
coming from your display. If you don't hear any
audio coming from the soundbar aim the remote at
the soundbar and press the AUX button. You should
see a green light illuminated when the Aux input is
selected. When AUX is selected on the soundbar
it will support both the analog 3.5mm input and the
optical digital audio input.
3. To listen to a Bluetooth® enabled device, aim the
included remote at the front of the soundbar and
press the button with the Bluetooth icon on it.
4. When the soundbar is switched to the Bluetooth
input a blue light will appear on the soundbar. Make
sure that Bluetooth function is enabled on the
device that is being connected and that the device
is within Bluetooth range (33'). Scan for devices on
your Bluetooth enabled device and select "Peerless-
AV" from the list of devices. Start playing content
from your Bluetooth enabled device.
NOTE - The soundbar remote control does not carry
an IP rating. Do NOT allow the remote control to get
wet. Do NOT leave the remote control outside when the
soundbar is not in use.
OPERATING INSTRUCTIONS
Discrete OFF
OFF
Bass-
Volume-
Treble -
Bluetooth
ON
Vol+
Bass- Bass+
Vol-
Treble - Treble +
AUX
peerless-AV
Remote control functions
Discrete Off – Powers the soundbar Off
Discrete On – Powers the soundbar On
Mute – Toggles the mute on and off
Bass - – Decreases the bass level
Bass + – Increases the bass level
Volume + – Increases the output level
Volume - – Decreases the output level
Treble - – Decreases the treble level
Treble + – Increases the treble level
Power – Toggles power on and off
Bluetooth – switches to bluetooth input
AUX – switches to 3.5mm/optical input
20
Discrete ON
Mute Toggle
Volume +
Bass+
Power Toggle
Treble +
AUX Input
2017-07-25 #:180-9109-2 (2017-08-28)