Product Specifications; Sound Bar - peerless-AV XTREME SPK-080 Guia Del Usuario

Troubleshooting
Distorted Audio
No Audio
Problem
Connecting a
Bluetooth Enabled
Device
Specifi cations subject to change without notice

Sound Bar

TV Size Range
Built-in Class D Amplifi er
Audio Inputs
Environmental Protection
Frequency Response
Operating Temperature Range
Vesa Mounting Pattern
Product Dimensions
Product Weight
• Source level should not exceed 80%.
• Verify the the 3.5mm audio plug is fully inserted.
• Verify that the soundbar is plugged into an outlet that has power. Ensure that the audio
signal cable is connected to the audio-out port on the TV. Make sure that the source
volume is not muted and that the volume level is not at zero. Aim the remote at the
soundbar and select the desired input of the source that is playing.
• Aim the remote at the front of the soundbar and hit the Blutetooth icon.
• Make sure Bluetooth is enabled on the device that is being connected and that you are
within 33' of the soundbar.
• Complete a device scan on the device that is being connected and select "peerless-
AV" from the list of devices.
• If "peerless-AV" is not present on the list, turn the Bluetooth on the device off. Turn the
Bluetooth on the soundbar off by switching to the Aux input. Turn the Bluetooth on the
soundbar back on by pressing the Bluetooth button on the soundbar remote. Turn the
Bluetooth on your device back on and perform another scan.

PRODUCT SPECIFICATIONS

42" (107cm) and above
Total System Power: 200 watts
SPL 105db
Crossover Digital Signal Processing (DSP)
Drivers (2) 3" [76mm] Aluminum Drivers
Tweeters (2) 1.5" [38mm] Titanium Domes
(1) Digital Optical Audio, (1) Analog 3.5mm connector,
(1) Bluetooth 4.0 input
IP65
Rating
50Hz - 20kHz
-40° - 120°F (-40°C - 49°C)
400mm wide pattern
38.13" x 3.91" x 4.32" (969 x 99 x 110mm)
9.7lb (4.4kg)
TIPS
21 2017-07-25 #:180-9109-2 (2017-08-28)