Attaching Screen With Vesa 100 Mounting Pattern - PEERLESS SGLS01 Manual De Instalación

Attaching Screen with VESA 100 Mounting Pattern

• If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to screen or product may fail.
10 Choose hole pattern as shown in figure 10. Attach
hook plate (B) to back of screen using four M4 x 12
mm screws. Tighten screws using a phillips screw-
driver.
fig 10
M4 X 12 MM SCREWS
Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired screen orientation. Tighten all screws
12
using 4 mm allen wrench (R).
L
No Tilt
WARNING
11
B
L
2° Backward Tilt
10 of 30
All other brand and product names are trademarks or registered trademarks of their respective owners.
Attach hook plate (B) to screen mount bracket (A).
L
5° Forward Tilt
ISSUED: 07-28-06 SHEET #: 202-9156-4 11-20-06
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
B
A