Tools Needed For Assembly - PEERLESS SGLS01 Manual De Instalación

Note: Read entire instruction sheet before you start installation and assembly.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-729-0307.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-
ware and components.
• Never exceed the Maximum Load Capacity.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• The floor stand is not affixed or secured to the floor, and may therefore tip over and/or fall if screen and/or stand is
shaken or hit. Always monitor children and do not let children play alone around stand as they could get hurt by a
falling screen. Not recommended for use in areas with heavy traffic.

Tools Needed for Assembly

• level
• phillips screwdriver
Table of Contents
Parts List .......................................................................................................................................................................... 3, 4
Assembling Floor Stand ........................................................................................................................................................ 4
Attaching Screen Using Universal Plate with Adapter Brackets ................................................................................................ 7
Attaching Screen with VESA 100 Mounting Pattern ............................................................................................................... 10
WARNING
2 of 30 ISSUED: 07-28-06 SHEET #: 202-9156-4 11-20-06