Briteq Tornado 7 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Operation Mode
This submenu is used to select in which operation mode the unit should work.
 Select the "Operation Mode" submenu and press ENTER.
DMX Operation
Select this option if the projector should be controlled by DMX.
 Select "DMX Operation"
 Press the ENTER button to confirm.
To return to a previous menu, press the ESC. button.
Sound operation
Used to select different internal sound activated programs.
 Select "Sound Operation" and press ENTER.
 Use DOWN / UP buttons to choose one of the tests:
 0: all 6 sound programs will be played.
 1 ~ 6: different sound programs, you can choose the one you like most.
To return to a previous menu, press the ESC. button.
Preset Memory
Used to run a factory program, this program cannot be edited.
 Select "DMX Operation"
 Press the ENTER button to confirm.
To return to a previous menu, press the ESC. button.
User Memory
Used to run your own made program, this program can be edited by the user.
 Select "User Memory"
 Press the ENTER button to confirm.
To return to a previous menu, press the ESC. button.
Memory Edit
Used to edit the scenes from your own made program.
You can create your own program using 11 different parameters. Maximum 16 scenes can be created,
adapted and deleted. Once the program is ready, it can be run by selecting operation mode = User Memory.
 Select "Memory Edit" and press ENTER.
 Use DOWN / UP buttons to select one of the "Static Scenes" and press ENTER.
Static Scene 1 ~ 16
Adapt up to 16 scenes.
 Use DOWN / UP buttons to select one of the "Static Scenes" and press ENTER.
 For the selected scene you can use DOWN / UP buttons to adjust the parameters of the following
options: Colors, pan/tilt location, pan/tilt rotation, pan/tilt speed and holding time of the scene.
To return without any change or go to a previous menu, press the ESC. button.
 Use DOWN / UP buttons to select "Delete Scene" and press ENTER.
Delete Scene
Delete separate scenes or all scenes together.
 Delete one scene: use DOWN / UP buttons to select one of the 16 "Delete Scene" options and
press ENTER.
 Delete all scenes together: use DOWN / UP buttons to select "DeleteAllScene" and press
ENTER. (Be careful: ALL scenes will be lost and cannot be recovered!)
To return to a previous menu, press the ESC. button.
BRITEQ
®
7/65
USER MANUAL
TORNADO 7

Publicidad

Tabla de contenido
loading

Tabla de contenido