3M DBI SALA AK203AG Manual Del Usuario página 11

Inspection Date:
Components: Inspection:
Protecta Winch Inspect the Protecta Winch for damage: Inspect all screws, bolts and nuts. Ensure they are
securely attached and tight. Check to see if any bolts,
(Figure 2)
nuts or other parts are missing, or have been substituted or altered in any way. Inspect covers
and housings. Ensure they are free of cracks, dents, corrosion or other damage.
Inspect each system component (support structure, back-up fall arrest system, body support,
connectors, etc.) according to manufacturer's instructions.
Inspect entire length of wire rope assembly. Always wear protective gloves when inspecting
wire rope.
Labels (Figure 8)
Verify that all labels are securely attached and are legible (see 'Labels')
PFAS and Other Additional Personal Fall Arrest System (PFAS) equipment (harness, SRL, etc) that are used with
the Winch should be installed and inspected per the manufacturer's instructions.
Equipment
Serial Number(s):
Model Number:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
1 Competent Person:
One who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary,
hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.
Table 2 – Inspection and Maintenance Log
Inspected By:
(See Section 1 for Inspection Frequency)
User
Date Purchased:
Date of First Use:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Competent
Person
1