Care And Maintenance - CAPITAL SPORTS Evo Race 10034918 Manual Del Usuario

EN
56
Kinomap can be used in the following ways:
(A) Smart: in combination with the supplied sensor. The sensor can then send
the heart rate to the app and the simulation speed depends on it.
(B) Camera Feature: When the sensor is not in use, Kinomap can determine
the cadence based on the user's movement and controls the simulation
based on the rider's movement.
Note: The included Bluetooth pulse belt can connect to Kinomap by
clicking on „Add a new sensor" instead of „Equipment".

CARE AND MAINTENANCE

Note: As with all training machines with mechanical, moving components,
screws may loosen due to frequent use. We therefore recommend that you
check them regularly and, if necessary, retighten them with a suitable key.
Clean your training device regularly with a damp cloth to clean the surfaces
from sweat and dust.
• When you don't use the exercise bike for a long time, please take out the
console battery to avoid running out of battery.
• Often clean the exercise bike with clean cloth to keep the clean
appearance.
• The safety level of the equipment only can be maintained if it is regularly
examined for damage and or /wear and tear.(e.g. handle bar, pedals and
seat ...etc.).It is vital that any faulty parts are replaced and the it is not
used until completed repaired.
• Regularly check that the elements fastened with nuts and bolts are
correctly tightened.
• Remember regularly to grease moving parts.
• Special attention to the component, most of them are susceptible to wear
like brake system, foot pad etc.
• As sweat is very corrosive, do not allow it to come into contact with the
enameled or chromed parts of the equipment, particularly the computer.
Immediately wipe the equipment after using. The enameled parts can be
cleaned using a damp sponge. All aggressive or corrosive products must
be avoided.
• Storing the equipment in a clean and dry environment away from children.