Troubleshooting; Warranty - Snap-On BK8000 Manual De Usuario

Troubleshooting

SYMPTOM
Display Unit does not
display image from
imager handle
LCD screen is black,
but Display Unit is
ON
Unit will not switch on
Battery does not hold
a charge
Units will not charge
LED on imager is ON
but no image
Image on display is
frozen
Image on display is
breaking up or jerky
Charging LEDs flash
red/green
Charging LED glows
amber

Warranty

Limited Two (2) Year Warranty Snap-on Tools Company (the "Seller") warrants only to the original purchaser that under normal use, care and
service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for two years from the
date of original invoice. SELLER'S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER'S
OPTION,REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER'S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND
WHICH ARE NECESSARY IN SELLER'S JUDGMENT, TO RETURN THIS EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WAR-
RANTIES, EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. This
warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning,in operability
or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering;(B) alteration, modification or
adjustment of the Equipment by other than Seller's authorized representatives; (C) installation, repair or maintenance (other than specified operator
maintenance) of the Equipment or related equipment, attachments, peripherals or optional features by other than Seller's authorized representatives;
(D) improper or negligent use,application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightening or other natural causes; (F)
adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio
frequency interference, electric power failure, power line voltages beyond those specified for the Equipment, unusual physical, electrical or electro-
magnetic stress and/or other condition outside of Seller's environmental specifications;(G) use of Equipment in combination or connection with other
equipment, attachments, supplies or consumable not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or
local regulation,requirement or specification governing emission analyzers and related supplies or consumables. Repairs or replacements qualifying
under this Warranty will be performed on regular business days during Seller's normal working hours within a reasonable time following purchaser's
request. All requests for Warranty service must be made during the stated warranty period. This Warranty is nontransferable.
18
Digital Wireless Video Scope
POSSIBLE REASON
The imager is not inserted into the
imager handle
Imager handle not switched on
Imager handle is not paired with Display
Unit
USB cable is inserted
Video out cable is inserted
Battery is very low
Faulty battery
Power supply is not plugged in.
Battery is too hot
Broken video signal wire
Processor locked up
Imager handle out of range of Display
Unit
Interference on radio
Faulty battery
Battery is low
Connect imager securely to imager
handle
Switch imager handle on & pair
with Display Unit
Use Settings Menu to pair
imager handle with Display Unit
Remove cable
Remove cable
Charge unit until Green charge
LED illuminates.
Return unit to appropriate service
center location.
Connect power supply to AC
supply and to BK8000
Allow unit to cool
Test with second imager if
available. Return to appropriate
service center location
Cycle power
Move imager handle and Display
Unit within recommended range of
30 feet (10m)
Change channels on other radio
devices near by
Return unit to appropriate service
center location.
Charge until Green LED illuminates
Snap-on
SOLUTION