Hayward PRHX7010 Manual Del Usuario página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Autonomous mode (RGB color spotlight only).
If there is no RC unit, the spotlights operate independently and the user can choose between 18 modes: 11 fixed colors
and 7 automatic color change sequences (see sequence table below).
Sequence
*: Sequence possibly customizable using and connecting the spotlight on a case 34RCLED.
Color change: It can be obtained by switching off the power to the spotlights for a very short time (<1s).
The 18 operating modes can be run through successively by switching the power on and off in this way. After mode 18,
the spotlights return to the first automatic sequence (mode 1).
Synchronisation: To synchronize the spotlights by bringing them all back to mode 2 simultaneously, switch off the power
supply for 2s.
When the spotlight is switched on after being switched off for several seconds (>4s) the spotlight lights up white for
15s, then starts the mode it was in when it was last switched off: this allows you to obtain maximum lighting if anyone
accidentally falls into the pool.
Safety (RGB color spotlight only).
If the temperature inside the bulb rises abnormally, a safety mechanism stops the lighting and the bulb flashes red. As
soon as the temperature returns to normal, the bulb starts operating again.
If the voltage detected is too low (>11V) or too high (>15V) the bulb stops working and flashes green. The power
supply to the spotlights must be switched off to return to normal operation.
Parts must only be replaced with genuine spare parts.
You are advised to change all the sealing parts when a bulb and/or the cable are changed.
If a fault occurs, the complete LED bulb must be replaced. Do not try to open or repair it.
Page 5 of 5
Color / Programme
1
Color: White
2
Color: Blue
3
Color: Blue Lagoon
4
Color: Cyan
5
Color: Purple
6
Color: Magenta
7
Color: Pink
8
Color: Red
9
Color: Orange
MAINTENANCE
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
USAGE
Sequence
10
Color: Green
11*
Color: Emerald green
12
Programme: fast color change
13
Programme: slow color change
14
Programme: 11 fixed colors
15
Programme: Psychedelic
16
Programme: Blue/Cyan/White
17
Programme: Random colors 1
18
Programme: Random colors 2
LED Lights
Color / Programme
Rev. A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Prhx7009Prhx20ldrvbPrhx20ldw

Tabla de contenido