4) maintenace
- Switch off the device before any maintenance is performed.
- To maintain the performance of the device, about twice per year,
clear the dust.
do not use abrasive products.
Your device gives you the capability of using several functions:
- The 2h Boost function, which enables you quickly to raise your room's temperature. Your device
will operate at maximum power for 2 hours.
- The 24h auto heating function
24 hours. Your device will operate at maximum power for 2 hours every day of the week at the same
time.
- The 24h auto drying function
the week at the same time. This is ideally used during mid-season; the device is set for moderate
heat.
- The Locking function enables you to set the heating mode you have selected (e.g.: ON mode, tem-
perature set with the wheel on
instance by children, etc.).
Control box
Central programming control (see programmer instructions)
Centralised programming (via the PilotWire) enables you to make savings by programming temperature
reductions when you wish, depending on the bathroom's period of use.
U
Sing The deviCe
, which enables you to repeat the 2h Boost function every
, which enables you to heat and dry your towels every day of
). It is used to prevent inadvertent manipulation of the device (for
a
B
C
d
19
Mode selection and control locking
wheel.
2h Boost, 24h Auto heating, 24h Auto
Drying and locking function operating
light.
Heating light
Temperature setting wheel
gB