Tabla de contenido
Publicidad
SECTION 4 - FINAL ASSEMBLY
6a. Install back mirrors in cabinet by removing 4 screws securing right hand ceiling, if not already removed from electrical wiring, and
place aside. Screws can be removed with supplied 3/32 Allen key.
6b. Position right hand mirror into cabinet and reinstall ceiling. Ceiling should be oriented with flange toward back of cabinet and bent
down.
7. Apply electrical power to cabinet and check all functions.
Note: for 24" cabinets, skip to step 9.
6a
6b
8a. Remove 4 screws securing left hand ceiling, and place aside.
8b. Position left hand mirror into cabinet and reinstall ceiling.
8a
8b
Part no. 209-1311-rB rev. 08/21/19
Uplift Tech Cabinet
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
9
Installation instructions
Publicidad
Tabla de contenido
