General Operation - ArmorAll DVTB202 0901 Manual De Instrucciones

INSTALLING & REMOVING BATTERY PACK
1
1. Flip the ON/OFF switch to the 'O' OFF position. (Fig. 1)
2. To insert the battery pack, slide it into the battery bay until it snaps into place. (Fig. 2)
3. To remove the battery pack, press the latch and pull it out of the battery bay.
STARTING/STOPPING THE WET/DRY VACUUM
3
To turn on the wet/dry vacuum, flip the switch to the 'I' ON position. (Fig. 3) To turn off the wet/dry
vacuum, flip the switch to the 'O' OFF position. (Fig. 4)
O = OFF I = ON

GENERAL OPERATION

2
4
7