Description Of The Device - AEG BMG 4906 Instrucciones De Servicio/Garantía

AEG_BMG_4906_BedAnl_80x80_3.qxd
GB

Description of the device

A. Denomination of the
components
1. Display
2. + button
3. - button
4. MODE button
5. START button
Putting in the batteries
Remove the cover of the battery compartment on the lower side of the mea-
suring device and put the batteries into the battery compartment as shown.
Put in 2 batteries of type 1.5V, type AAA. Pay particular attention to the cor-
rect positions of the + and – poles of the batteries. Close the battery com-
partment.
A battery symbol on the display indicates that the batteries should be repla-
ced. Always replace the whole battery set, never replace only one battery.
Attention: Batteries do not belong in your usual household rubbish. Please
dispose of old batteries at proper collecting points or at the competent dea-
ler. Never throw batteries into a fire.
76
B. Description of displayed symbols
A. Pulse symbol
B. Memory function
(Memory)
C. Memory location
number
D. Pulse/measured
value
E. Battery symbol
F. Month
G. Day
H. Hours/minutes (time set)
19.02.2008
I. DIA diastole
J. Blood pressure unit
K. TESTING symbol
L. RETEST symbol
M.SYS systole
17:35 Uh