Time Stamp; Led I Ndicator - Brinno TLC200 Pro Manual De Instrucciones

E xp o s ure
Into Exposure setting, press MENU (
increase ( + ) or decrease ( - ) the exposure and press OK
to exit.
Custom I mage
Control Saturation, Contrast, Sharpness. Select and enter each
setting, using MENU (
Then press OK to exit.

Time Stamp

You can choose if you want the time stamp to show at bottom
of your video.
1. Select Time Stamp. 2. Select ON or OFF.
Low Light R ecording
You can choose to set up your camera to record videos in a low
light environment or not. (< 5 Lux).
1. Select Low Light Recording. 2. ON: Allows your camera to
record video in a low light environment. OFF: Your camera will
go to sleep in a low lightenvironment.
S e t Date & Ti m e
Set the correct date and time for your camera.
1. Select Set Date & Time. 2. In the highlight field, press MENU
( - ) to decrease the number, press TIME ( +) to increase the
number, press OK to confirm and go to the next field.
When finished, press OK to exit set up.

LED I ndicator

You can choose whether or not the LED indicator will flash
while capturing each frame.
1. Select LED Display. 2. ON: When the camera is capturing a
frame, the LED indicator will flash once. OFF: During capture
period the LED indicator will not flash at all.
B a n d Fi l te r
Select the correct fluorescent lighting frequency to match your
indoor lighting frequency.
1. Select Band Filter. 2. None: For outdoor environment. 50 Hz:
USA 60 Hz: Europe
08 ENGLISH
) and TIME (
M o re S et t i n g s
) and TIME ( ) to
) to adjust the effect.