Brinno TLC200 Pro Manual De Instrucciones página 11

Displays the current version of firmware installed on the camera.
1. Select Firmware Version. 2. Displays the current version of
firmware for 30 seconds. Press the OK button to exit firmware.
You can reset your camera back to the default setting.
1. Select Reset. 2. Select YES and press the OK button to reset your camera.
Function
Capture mode
Time Interval
Time Lapse Frame Rate
White Balance Mode
Image Quality
Scene
HDR Range
Time Stamp
Low Light Recording
LED Indicator
Band Filter
The TLC200 Pro comes with a n interchangeable CS-Mount lens, so you
can change the CS-Mount lens by yourself to fit your shooting needs.
This extension connector is used for optional Brinno Time Lapse
accessories. Shutter Line (ATS110): For creating Stop Motion film and Face
Time Lapse video Motion Sensor (ATM110): For motion activated using,
turn your time lapse camera into a motion activated camera!
For long term use, you can attach an external power supply (DV
5V) through the Micro USB connector.
A. File transfer-You can connect the TLC200 Pro to your computer in order
to transfer the time lapse video from the SD card to the computer. OS
requirement: Windows 98 and above.
B. Webcam-With the TLC200 Pro connected to your computer you can install
free webcam software. The TOC200 Pro can then be used as a webcam
for your computer! Suggested software: please check on Brinno.com OS
requirement: Windows 98 and above.
Fi r mwa re ver s i o n
R e se t
Time Lapse
2 seconds
10 FPS
Auto
Better
Daylight
Medium
ON
ON
ON
None
R e fe re n ce
C S - m o u nt l en s
E x te n s i o na l a cce ss o r i e s
E x te r n a l Power
M icro USB connec tor
Setting
ENGLISH 09