Turning On The Camera; Setting The Time And Date; Time Lapse M Ode - Brinno TLC200 Pro Manual De Instrucciones

How Our Power Saving Technology Works
At The Set Up Screen After 10 seconds without activity
on the set up screen, the camera will go to Preview screen
automatically. You can press the MENU or TIME button to go
back to the set up screen.
At Preview Screen After 50 seconds without activity on
the set up or preview screen, the LCD screen will Turn off
automatically to save power. You can press the OK button
to wake up camera.
I n s t a ll i n g th e B at ter i es
1. Open battery door. 2. Insert 4 AA batteries. 3. Close battery
door. Be sure the battery cover is locked into place.
I n s ta l l i n g SD Ca rd
1. Open SD card cover. 2. Insert SD card until it clicks into place.
3. Close SD card cover.

Turning on the Camera

1. Rotate the Power switch to the ON position. 2. Process
screen It may display other information on screen, please
refer to "Display Icons" 3. Set Up screen.
S etting the Time and Date
1. Press the MENU button to go to Setting -> MORE 2. At
MORE Setting, select Set Date & Time, and press OK. 3. At
the highlight field, press MENU (
) to decrease value, press
) to increase value, press OK to confirm and go to the
TIME (
next field. When finished press OK to exit set up.
M o d e

Time Lapse M ode

In Time Lapse Mode, the camera will take one photo at the
time interval you selected. When you are finished recording,
the camera will convert those photos into a time lapse video!
Before you begin recording, you can change the "Time Lapse
Frame Rate".
Output file format: AVI. (Without audio) Resolution: 720P
Time Lapse video length: The maximum size of each single AVI
file ranges between 8,192 to 20,480 frames, depending on the
time interval setting.
ENGLISH 05