Tabla de contenido
Publicidad
IMPORTANT CONSUMER INFORMATION
RENSEIGNNEMENTS POUR LE CONSOMMATEUR IMPORTANT INFORMACIÓN
IMPORTANTE PARA EL CONSUMIDOR
CARE AND CLEANING
Clean the entire surface of your JSG Oceana glass lavatory with mild soap and warm water. The
exterior of your glass sink should only be cleaned with mild soap and warm water. Wipe the
entire surface completely dry with a clean, soft cloth. If the interior surface of your JSG Oceana
glass lavatory becomes excessively dirty, we recommend using the following general purpose
cleaners: Fantastik®, Lysol®, Foaming Disinfectant, Dow Bathroom Cleaner Liquid, Scrub
Free®, Soap Scum Remover, or Mr. Clean®.
CALL US FOR HELP - 724.523.5567
First review the installation instructions to ensure correct installation. If you are unable to correct
the problem, call our Customer Service Department for direct help. Dial 724.523.5567 from
within the USA.
All of JSG Oceana glass lavatories are IAPMO approved. Our drain and faucet measurements
are specified for USA brand plumbing fixtures.
LIMITED ONE-YEAR WARRANTY
JSG Oceana Glass Lavatories are warranted free of manufacturing defects. Slight variations including crys-
talline material and bubbles are common contribution to the aesthetic value and are not defects. JSG Oceana
will, at its election, repair, replace, or make appropriate adjustment where JSG Oceana inspection discloses
any such defects occurring in normal usage within one year after installation.
responsible for installation or removal costs.
Proof of purchase requires the original sales receipt from the original consumer purchaser and must accompa-
ny all warranty claims. To obtain warranty service, contact JSG Oceana either through your dealer or Plumb-
ing Contractor, or by writing JSG Oceana, Attn: Customer Service Department, 215 N. Fourth Street, P.O.
Box 99, Jeannette, PA, 15644.
Implied warranties, including that of merchantability or fitness for a particular purpose, are expressly
limited in duration to the duration of this warranty. JSG Oceana disclaims any liability for special,
incidental or consequential damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation or
special, incidental, or consequential damages, so these limitations and exclusions may not apply to you. This
warranty gives you specific legal rights. You may also have other rights which vary from state to state.
This limited warranty provides specific legal rights as they apply within the USA, and other rights may be
available, but may vary from country to country.
This is our exclusive written warranty. JSG Oceana, Jeannette, PA 15644
ENTRETIEN ET NETTOYAGE
Nettoyer la surface de votre lavabo en verre JSG Oceana avec un savon doux et d'eau
chaude. Essuyez complètement toute la surface avec un chiffon doux et propre. Si la
surface de votre lavabo en verre JSG Oceana devient excessivement sale, vous pouvez
utiliser un général tout usage tel que: Fantastik®, Lysol®, Dow Nettoyant salle de bain
liquide, Scrub Free®, ou M. Net® .
APPELEZ-NOUS POUR AIDER-724.523.5567
Lisez d'abord les instructions d'installation pour assurer une installation correcte. Si
vous ne parvenez pas à corriger le problème, appelez notre service à la clientèle pour
une aide directe. Composez 724.523.5567.
Toutes les lavabos en verre JSG Oceana sont approuvés par IAPMO. Nos mesures de
vidages et robinets sont spécifiées pour les appareils de plomberie aux États-Unis.
Undermount Installation Instructions:
Tools and Materials:
1. Inspect sink prior to installation. No returns accepted after installation
unless product is mechanically defected.
2. Provide your countertop manufacturer with your lavatory template
(provided), to assist in your granite cut-out. Templates are supplied
only as a guideline, the physical use of the sink will assure an accurate
cut-out. JSG Oceana takes no responsibility for inaccurate cutting of
the granite.
3. Pre-install the drain to the lavatory, if possible.
4. Clean the underside of the countertop and the rim of the lavatory.
JSG Oceana is not
5. Loosely install the clips (not provided) into your pre-drilled counter-
top.
6. Apply a clear epoxy/caulking to the top rim of the undermount and
then hold it in place under the countertop.
7. While holding the lavatory in place, rotate & tighten clips evenly.
8. Wipe away excess sealant and allow sealant time to set, according to
sealant manufacturer's instructions.
9. Complete the water supply and drain connections.
10. Run water into the lavatory and check for leaks.
6"
Sealant
19 ½"
1 ¾" drain hole
L Bracket
Countertop
Sealant
Sink
Allow 2" minimum for clearance
around sink rim for clip attachment.
Foam bumpers (optional)
Clip (not included)
Publicidad
Tabla de contenido
