Twin-Star International 26MM4155 Manual De Instrucciones Adjunto página 5

9. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 8. Then locate Top Panel
(G1, G2) and lay f nished side up on top of
completed assembly. From the inside, attach
Top Panel (G1, G2) using Bolts (L) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom,left
and right.
11. Attach Side Back Panels (R) and Center
Back Panel (V) to the back of the completed
assembly from step 10. Use a Phillips Head
Screw Driver, tighten Wood Screws (Q1)
through the pre-drilled holes in the Side Back
Panels (R).
E-4
Right Top
Panel
G2
N
N
N
M
L
Q1
Center Back
Panel
R
Side
Back
Panel
Left Top
Panel
G1
N
N
N
Q1
V
Side
Back
Panel
N
M
L
R