Twin-Star International 26MM4155 Manual De Instrucciones Adjunto página 6

12. Attach the Magnetic Spring Catch (T) on the
bottom of Top Panel, tighten screws (Q2)
through holes to the block as shown in
diagram.
13. Place the Door Touch Clip (U) to the glass
door. Insert the Pivot Hinge (K) into the
plastic mat as shown in diagram. Then push
the Glass Door (P) snug to the Pivot Hinges
(K), use a Phillips Head Screwdriver to
tighten the pivot hinge against the glass.
WARNING
Do not over tighten catch screws.
Damage to the Glass could occur!
14. Place the Glass Top (W) on the top of the
mantel. Choose desired height of Shelf (H)
and place the four Shelf Pin (O) into same
height shelf holes inside side panels. Insert
Wood Shelf (H), allow Wood Shelf (H) to rest
on the Shelf Pin (O).
E-5
P
Door
Glass
Touch Clip
Door
U
Glass Top
W
H
Wood
Shelf
O
Shelf
Pin
Magnetic
T
Spring
Catch Q2
Glass
P
Door
K
Pivot
Hinge