Nostalgia Products CCM200 Manual De La Instrucción página 12

10. Attach the assembled Storage Compartment (G) parts to the wheels/legs
assembly. Push Storage Compartment (G) down until it is fit into place.
Assembly of Main Unit
Main Unit
Storage
Compartment
• Place Main Unit (A) onto the top of the Storage Compartment (B).
• Ensure that the two inserting pins underneath the Main Unit (A) line up correctly so that
Main Unit (A) can be locked under the beam of the Storage Compartment (C) (see figure 1).
unlocked
figure 1
Attaching Rim to Bowl
Align the four arrows located on the outer edge of the Rim with the four
small holes located on the outer edge or the Bowl, then press together.
ON/OFF Switch
Push Handle
Rim
Bowl
locked
10