Cub Cadet FastAttach Manual Del Operador página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
Broadcast Sprayer Mode
1.
If not already running, start tractor.
2.
To engage broadcast sprayer mode,
rotate valve control to "ON" position. See
Figure 4-15.
Figure 4-15
3.
Move harness control to "ON" position to
start pump. See Figure 4-16.
Figure 4-16
Note: Spot sprayer wand is functional
during broadcast sprayer mode.
10
4.
Move harness control to "OFF" position
to stop pump. See Figure 4-17.
Figure 4-17
5.
Disconnect the battery wire harness from
the pump wire harness when not in use
to prevent accidental battery drainage.
See Figure 4-18.
Figure 4-18
Drain
1.
To drain excess fluids from the sprayer
tank, unscrew the cap located on the
bottom of the tank. Once drained,
make sure that the o-ring is in place and
tighten drain cap. See Figure 4-19.
Figure 4-19
4

Publicidad

Tabla de contenido
loading

Productos relacionados para Cub Cadet FastAttach

Este manual también es adecuado para:

19a30035100

Tabla de contenido