Steren TEMP-300 Manual De Instrucciones

Before using your new Electronic insect killer, please read
Before using your new Steren 6 Event digital timer,
please read this instruction manual to prevent any damage.
this instruction manual to prevent any damage. Put it away in
Put it away in a safe place for future references.
IMPORTANT
• Keep device out of the reach of children.
• Do not plug this timer into another timer switch.
• Do not plug any device performing mechanical movement directly in the timer.
• Do not insert needles or any other metal objects into mains outlet.
• Do not try to open the device, may cause damages and warranty will be void.
• Do not expose to extreme temperatures.
• Do not use or store the equipment near wet places. May cause malfunction or shock
hazard.
• Avoid dropping the unit as this may cause damage.
• Clean with a soft, dry cloth.
HIGHLIGHTS
The 6 event digital timer has a small size and it is perfect for lamps.
It is very simple to program and includes a rechargeable and internal battery, allowing
their continuous use even in case of an outage.
The programmed time is in periods of 5 minutes, it has also, a random mode, with 30
minutes periods. It features polarized plug and outlet, LCD screen and it can display
timeand program.
6 programmable events, Backup battery, 5 minutes programming period, 625W
maximum output.
CONTROLS
If the LCD doesn't display, plug the unit into a wall receptacle for 1 hour
to charge the battery.
5
4 1 2 3
3.- ON/OFF : To change output state to ON/OFF in AUTO or MANUAL mode.
AUTO: Execute all programmed events , automatically.
MANUAL: The connected device will be powered on/off only if you press the
on/off button.
4.- RESET : To initialize or reset the unit.
5.- OUTLET: Use to connect your lamps or devices.
CLOCK TIME SETTING
1.- Under the normal working conditions press the SET button. The hour digits will
flash on display.
2.- Using + or – button set the correct hour. The setting time will increase or decrease
continuously if + or – buttons depressed for more than 1 second.
3.- Press the button SET again to set minutes. The minute digits
will flash on display.
4.- Using + or – buttons set the correct minutes.
5.- Set time will increase or decrease continuously if + or – button
depressed for more than 1 second.
6-. Press SET button.
7.- Wait few seconds, the clock will be updated.
PROGRAMMING OF SWITCHING TIMES (ON/OFF)
1.- After clock time setting has been set, press the SET button
again to set the firts "ON" program time. The "PROG 1 ON" will
appear on the LCD display and flash.
2.- Press the + or – buttons to set the ON time of the first program.
Set time will increase or decrease continuously if press and hold +
or – buttons more than 1 second.
3.- When required ON time completed, press the SET button again
to set the program OFF time. The "PROG 1 OFF" will appear on the LCD display and
flash.
4.- Using + or – buttons set the first program OFF time. The set time will increase or
decrease continuously if + or – buttons depressed for more than 1 second.
1.- SET : To set the time and the
program.
2.- + / - : To increase or decrease the
digit in setting. They are active only in
programming process.
5.- Pressing + and – buttons simultaneously will cancel the current program setting.
6.- Repeat 1 – 4 steps to set other programs ON/OFF time.
7.- After program setting has been completed, press SET button to run the unit.
RANDOM ON/OFF SECURITY FEATURE
Simultaneously press the SET and ON/OFF buttons to
enter the random mode.
A "R" icon will appear on the display. Programmed ON/
OFF time will randomly fluctuate in a range of +/-30min.
Simultaneously pressing the SET and ON/OFF buttons
again will exit the random mode.
MANUAL OVERRIDE SETTING
You can choose permanent manual ON, Manual OFF.
Press ON/OFF button under ON or OFF mode, the unit will be forced into ON/OFF mode.
Press ON/OFF permanent override. And the LCD will display AUTO.
Under the manual override mode the random function will be cancelled.
RESET BUTTON
Press the RESET button. The "0:00" will appear on the LCD display and the unit will
turn off your system.
SPECIFICATIONS
Input: 125V~ 60Hz 5A max.
Output: 125V~ 60Hz 5A max.
Operational temperature: 0°C to 40°C
Resistive load: 625Wmax
Tungsten lamp load: 250Wmax
Before using your new Electronic insect killer, please read this
Product design and specifications are subject to change
instruction manual to prevent any damage. Put it away in a
without previous notice.
Product: 6 Event digital timer
Part number: TEM-300
Brand: Steren
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
WARRANTY