PC Locs Carrier 30 Cart Instrucciones Para El Usuario página 5

Insert each device plug.
For security, close the sliding lids, swing the handle closed and lock the key-lock.
The devices can be charged with the sliding lids closed.
STEP 3 - Replacing the bottom Tray.
Release the 2 retaining latches (pull up).
Retaining latches are located near the wheels.
Secure the retaining latches by pressing the silver
button. Ensure the pin enters the hole.
Press
INSTRUCTION MANUAL
Unwind the power cable and plug into the wall
socket. The devices will start to charge when
power is "On".
Slide out the old tray and slide in new tray.
CAUTION: Bottom Tray is heavy!
NOTE: For cart security, the latches must be
properly secured with the pins fully extended into
the hole in the tray.