HAIRCUT TH51 Manual De Usuario página 20

4 Use
Constant care must be taken when using the clippers near the ears.
Protect the ear with your hand to avoid all risk of injury due to the
cutter.
4.1 Use without power lead
With a new, fully charged battery, the clippers can be used without the power lead
for about 60 minutes.
Remove the cutter cover (Figure 1, K) and switch the clippers on by pushing the
On/Off switch (Figure 1, B) upwards.
4.2 Use with power lead
When the battery is discharged, the clippers can be used with the power lead
connected directly to the clipper socket (Figure 2).
Remove the cutter cover (Figure 1, K) and switch the clippers on by pushing the
On/Off switch (Figure 1, B) upwards.
4.3 Using the comb attachments
Figure 3: Fitting or removing the
comb attachment.
Selecting the comb attachment: four
comb attachments (3, 6 and 9 mm)
are supplied,
texturing
attachment.
Positioning the comb attachment:
grasp the comb attachment (A) by its
sides and slide it into the slots (B).
When the comb
correctly fixed, it is immobilized.
Removing the comb attachment:
grasp the comb attachment (A) by its
sides and pull it upwards.
20
together with
(tapering) comb
attachment
a
is