HAIRCUT TH51 Manual De Usuario página 22

5 Servicing
Use the soft brush supplied to remove hair from the blades. Never rinse the clippers
with water. If necessary, use a cloth slightly dampened with water or mild liquid
soap. Never use abrasive products or solvents.
Figure 6: Cleaning the cutters
1. Detach the blades by pressing on the
spot shown by the arrow (Figure 4) with
your thumb.
2. Use the cleaning brush supplied (Figure
6, A) to clean the blades.
3. Use the cleaning brush (Figure 6, A) to
remove hair from the gaps between the
fixed cutters (Figure 6, B) and the
mobile cutters (Figure 6, C).
Never remove the cutters or their
springs from the holder.
5. Apply 1 or 2 drops of lubricating oil on
each of the 5 cutter lubrication points
(Figure 5).
6. Put the blades back on the clippers.
22