User Settings - coval GVMAX HD Serie Manual De Instrucciones Simplificado

GVMAX HD
Heavy Duty Communicating Vacuum Pumps
9.2 Menu tree
Main screen
82

kPa

Process settings


User settings


Device settings

Diagnostic
www.coval.com


Process settings
- L1/h1: threshold and hysteresis for "object gripped"
- L2/h2: threshold and hysteresis for ASC vacuum con-
Process settings 1/2
L1/h1
- ASC: enable/disable ASC
L2/h2
- DIAG Eco: enable/disable DIAG Eco "anti-pulsation"

ASC
- Automatic blow-off (GVMAXHD___S_ only): en-
DIAG Eco
Auto Blow-off
User settings
User settings
Language
- Language: choose language (EN, FR, DE, ES, IT)
Screen
- Screen: enable/disable standby mode, screen rota-

Units
- Units: choose unit of measure for vacuum and pressure
Device settings
- Specific wiring (GVMAXHD_C24A2 only): invert
Device settings
Specific wiring
PNP/NPN
- PNP/NPN: input/output switching mode

NO/NC
- NO/NC: outputs 1/2 Normally Open or Normally
Output-2 mode
- Output-2 mode: ASC status, pressure fault, power
Diagnostic
Diagnostic
Device info
- Device info: reference number, device name, firm-
Cycle counters

Vacuum network test
Manual mode
- Cycle counters: vacuum and blow-off control, ob-
Calibration
Reset settings
- Vacuum network test: support function to dimen-
- Manual mode: manual vacuum and blow-off
- Calibration: calibrate vacuum and pressure sensor
- Reset settings: reset process settings or all settings
SIMPLIFIED OPERATING INSTRUCTIONS
Lock/unlock keypad
trol, only visible if ASC = ON
able/disable and configure timed automatic blow-off
tion setting (0, 90, 180 or 270°)
"object gripped" and "ASC" signals on output
connector
Closed
supply fault, ASC fault, object lost
ware version, serial number
jects gripped and lost, vacuum control cycles, control
errors, voltage and supply pressure faults, etc.
sion vacuum network
commands
(restore "factory" settings)
-14-
EN