Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY RULES IN THE INSTALLATION
SAFETY RULES IN THE INSTALLATION
SAFETY RULES IN THE INSTALLATION
SAFETY RULES IN THE INSTALLATION
Heat exchanger must be installed in a place free of frost.
Be sure that pressure is always lower than 3,0 bars in Secondary and 10 bars in
the Primary.
The exchanger or the environment could be damaged.
Check weekly that the exchanger and their connections are well
tight and there are not damages on them.
PRECAUTION
2 2 2 2
TECHNICAL DATA
TECHNICAL DATA
TECHNICAL DATA
TECHNICAL DATA
HEAT EXCHANGER
HEAT EXCHANGER
HEAT EXCHANGER
HEAT EXCHANGER
3 3 3 3
INSTALLATION/ASSEMBLY
INSTALLATION/ASSEMBLY
INSTALLATION/ASSEMBLY
INSTALLATION/ASSEMBLY
TRANSPORTATION/STORAGE
TRANSPORTATION/STORAGE
TRANSPORTATION/STORAGE
TRANSPORTATION/STORAGE
Transport the heat exchanger only after being drained.
Store the drained heat exchanger in indoor locations with a non aggressive
atmosphere.
4
ENGLISH
Publicidad
Tabla de contenido
