Assembling The Antenna - Philips SDV3427W/27 Manual Del Usuario

ASSEMBLING THE ANTENNA:

1) Assemble the Main Housing Unit to the
Main Boom.
Secure the Main Boom to the Main Housing Unit
with the M3 Wing Nut. Note: The main boom has
two slotted holes on one side and four holes on the
other side. Position the main boom with the two
slotted holes facing up.
Fig. 1a
Fig. 1b
2) Attach the VHF Dipoles.
Use the M5 x 35mm Wing Nut Bolt and M3 x 12mm
Wing Nut Bolts to attach the VHF Dipoles to the
Main Housing Unit. Note: One of the VHF Dipoles is
tapered and will slide into the other one.
Fig.2b
Fig.2a
10