Product Specification - Philips UV-C Manual Del Usuario

Operation guide
1. Power on: you will hear a beep, and the timer indicator will display "--".
2. Press the button to open the top lid, load the objects evenly into the UV-C appliance and close the top lid. Keep the top lid closed through-
out the appliance's operation.
3. Press working mode button to choose the appropriate working mode. See "Working mode guide" below.
4. Once the routine is completed, open the top lid, take objects out and unplug the UV-C appliance.
Working mode guide
Disinfect
Disinfect function inactivates viruses and bacteria
Gently press the "Disinfect" button, the timer indicator will display
"10" (10 min. disinfection duration by default). Both the timer
indicator and the working mode button will flash 3 times, during
this period, press the "Disinfect" button again to choose either "15"
or "20" as 15min. or 20min. working duration. The flash will stop in 2
seconds, and the UV-C appliance will start to work.
Dry
Dry function removes moisture from objects
Gently press the "Dry" button, the timer indicator will display "30"
(30 min. dry duration by default). Both the timer indicator and the
working mode button will flash 3 times during this period, press the
"Dry" button again to choose either "30" or "50" as 30min. or 50min.
working duration. The flash will stop in 2 seconds, and the UV-C
appliance will start to work.
IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRONIC
PRODUCTS. DOING SO CAN RESULT IN DAMAGE.
After dry routine, mind your hands when you open the box due to
the high temperature. Allow the box to cool for several minutes prior
to removing the object(s) placed inside.
Product description
Product model
Volt
Frequency
Wattage
UV-C appliance lifetime
Product Size
Product Weight
UV-C wavelength
Storage
Storage function continuously disinfects objects
Gently press the "Storage" button, the timer indicator will display
"20" (20 min. disinfection duration by default).
In this mode, the UV-C appliance will disinfect every 2 hours for 2
minutes after the 20 min. disinfection. The timer indicator is running
during the 2 hours periods and not during the 2 min. disinfection
duration and will stop at "--" when the 72 hours maintenance
routine is finished.
Disinfect+Dry
Disinfect+Dry function removes moisture and then disinfects objects
Gently press the "Disinfect+Dry" button, the timer indicator will dis-
play "40" (30 min. dry and 10 min. disinfection duration by default).
Both the timer indicator and the working mode button will flash 3
times, during this period, press the "Disinfect+Dry" button to choose
either "40" or "60" as 40min. or 60min. working duration(50min. dry
and 10min.disinfection). The flash will stop in 2 seconds, and the
appliance will start to work.
IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRON-
IC PRODUCTS. DOING SO CAN RESULT IN DAMAGE.
After disinfect+dry routine, mind your hands when you open the
box due to the high temperature. Allow the box to cool for several
minutes prior to removing the object(s) placed inside.

Product specification

UV-C disinfection box
9290024887
220-240 Vac
50/60 Hz
135 W
6000 hours
288.2 x 285.1 x 285.3 mm
2700 g
253.7 nm
4