IBP TD 3213 Instrucciones Para El Uso página 51

how to set the measurement unit
Your device can show you the measured results in millimol per litre (mmol/L) or milligram per decilitre
(mmg/dL). The unit mmg/dL is standard in the USA, in Canada the standard is mmol/L. Within Europe, both
measurement units are common.
1. Setting the measurement unit:
Leave the device switched off. Remove the battery compartment
cover on the bottom of the device, and press the Setting button
(SET) in the battery compartment. Press the Setting button (SET)
several times until the measurement unit for measuring blood sugar
appears (Fig. 3). Press the M button to set the required unit. Press
the Setting button (SET) to confirm the setting. The measurement
unit unit for measuring blood sugar begins to flash.
2. How to quit the setting mode:
Press the Setting button (SET) once more to quit setting mode.
device settings 6
(Fig. 3)
9