Sun Hydraulics XMD-01 Instrucciones De Instalación página 9

Mode of Operation
Coil Open
Command % out of range
If the equipment is used in a manner not specified by the
manufacturer, the protection by the equipment may be impaired.
This unit is intended only for connection to vehicle electrical systems
and voltage above the identified ratings should never be connected
to the unit.
Mounting Bracket Dimensions
Zinc Nickel plated for 1,000 hour salt fog protection.
NOTE: The XMD is compatible with standard 35mm DIN Rail with 1 mm
thickness. Use the bracket dimensions to source the proper DIN Rail size.
www.sunhydraulics.com
Status
© 2017 Sun Hydraulics Corporation
Pub.#999-901-853 November 2017
Description
Blink / Red – 3 blinks
125 ms ON / pause OFF
500 ms
Blink / Red – 1 blink ON /
pause OFF 500 ms
EN 09