Technical Data; Special Safety Instructions - Max 78700 Manual De Instrucciones

TILE CUTTER
Introduction
To get the most out of your new tile cutter,
please read this manual and the enclosed
safety instructions before use.
Please also save the instructions, as you may
need to refer to them at a later date.
This cutter is ideal for small and medium-
sized tiles for fl oors and walls. The bench can
be adjusted to any angle up to 45°, making
angled cuts simple and precise.

Technical data

Voltage/frequency:
Power rating:
Free rotation speed:
Max. cutting height:
Bench size:
Diamond disc:
hole diameter 25.4 mm
Sound pressure, L :
pA
Sound level, L :
wA

Special safety instructions

For use on fl at and stable surfaces only.
Ensure the water tank is always full to keep
diamond disc cool when cutting tiles.
Never use bent or broken diamond discs.
Never stop the diamond disc by applying
pressure to the tile cutting machine or the
side of the diamond disc.
Never allow the diamond disc to be in
contact with the item to be cut – or other
objects – when starting the cutter.
Always use protective gloves when handling
the diamond disc. Never put your hand near
230 V ~ 50 Hz
the diamond disc or try to remove material
600 W
from the working area while the diamond
disc is rotating.
2,950 RPM
Never use if protective equipment has been
35 mm
removed or does not work.
330 × 360 mm
Use a piece of scrap wood to feed small items
180 mm Ø,
towards the diamond disc. Never cut items
that cannot be handled safely.
92 dB(A)
105 dB(A)
Kpa: 3 dB(A)
GB
24